Dimensions: 1200mm wide x 190mm high ( 30mm for cap) & 250mm Deep.
The transmission tunnel recess is 420mm wide at the base tapering to 200mm wide at top of recess, and is 110mm high.
The cut-out for centre consoles is 200mm wide and 60mm deep.
Two Brass outlets with 1/2" BSPT female thread are fitted - one at each end. A blanking plug for the unused end and a hose adaptor to suit 3/8" (10mm) hose are included.
At the top of the tank near the filler cap is a 1/4" BSP brass insert and included with the tank is a vent and short hose kit. This allows the tank to breath and the short 500mm hose allows the vent to be fitted well above the top of tank.
If mounting the tank inside a vehicle we highly recommend using our optional vent extension kit (Part No FTUVK) which can either extend the location of the standard vent or more preferably allow the tank to be connected to the vehicles main fuel tank ventilation system.